Linksys wrt120n validating identity

Click Here for step by step solution Hi, First you have to access the router through web browser (Internet Explorer) by typing the IP address of your router in the address bar, which is usually 192.168.1.1 (also written at the back of the router) Then, press Enter. (You can set a new password from the Administration tab's Management screen.) Click OK to continue and lookup for the options to do the following (under Basic Setup): - 1. Change the default administrative user name and password (unless you've configured otherwise, the default username is admin and the password admin or password.)The SSID is the network name shared among all points in a wireless network.

The SSID must be identical for all devices in the wireless network.

If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

Continue with the remaining steps to pin-point on the third party service.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7. Microsoft.com/kb/929135 Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem Method 2: I would suggest trying the following steps and check the status of the question. This will grant you access to all the router settings.Are you trying to run the CD that comes with the router?I think you can try to setup your router manually instead of running CD.WRT160N router has issues with the firmware so I will suggest you to upgrade the firmware of WRT160n router first.

Leave a Reply